Ticket #431: dmesg.lt-25

File dmesg.lt-25, 15.3 KB (added by verem, 3 years ago)

dmesg output from LT-25

Line 
1Initializing cgroup subsys cpuset
2Initializing cgroup subsys cpu
3Linux version 2.6.27.5-117.fc10.i586 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Nov 18 11:43:59 EST 2008
4PAT WC disabled due to known CPU erratum.
5BIOS-provided physical RAM map:
6 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
7 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
8 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
9 BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
10 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
11 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
12 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
13last_pfn = 0x8000 max_arch_pfn = 0x100000
14kernel direct mapping tables up to 8000000 @ 7000-c000
15Using x86 segment limits to approximate NX protection
16RAMDISK: 07a60000 - 07fdf0ff
17DMI not present or invalid.
18ACPI: RSDP 000EC010, 0014 (r0 COMPAQ)
19ACPI: RSDT 000EC080, 0034 (r1 COMPAQ LAREDO          1             0)
20ACPI: FACP 000EC0CC, 0074 (r1 COMPAQ LAREDO          1             0)
21ACPI: DSDT 000EC192, 0AE0 (r1 COMPAQ     DSDT        1 MSFT  100000A)
22ACPI: FACS 000EC040, 0040
23ACPI: APIC 000EC140, 0052 (r1 COMPAQ LAREDO          1             0)
24ACPI: SSDT 000ECC72, 0C42 (r1 COMPAQ VILLTBL1        1 MSFT  100000A)
25ACPI: SSDT 000ED8B4, 03DF (r1 COMPAQ PNP_PRSS        1 MSFT  100000A)
26ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
27ACPI: Disabling ACPI support
280MB HIGHMEM available.
29128MB LOWMEM available.
30  mapped low ram: 0 - 08000000
31  low ram: 00000000 - 08000000
32  bootmap 00002000 - 00003000
33(9 early reservations) ==> bootmem [0000000000 - 0008000000]
34  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
35  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
36  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
37  #3 [0000400000 - 000097016c]    TEXT DATA BSS ==> [0000400000 - 000097016c]
38  #4 [0007a60000 - 0007fdf0ff]          RAMDISK ==> [0007a60000 - 0007fdf0ff]
39  #5 [0000971000 - 0000975000]    INIT_PG_TABLE ==> [0000971000 - 0000975000]
40  #6 [000009d400 - 0000100000]    BIOS reserved ==> [000009d400 - 0000100000]
41  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
42  #8 [0000002000 - 0000003000]          BOOTMAP ==> [0000002000 - 0000003000]
43found SMP MP-table at [c00f6070] 000f6070
44Zone PFN ranges:
45  DMA      0x00000000 -> 0x00001000
46  Normal   0x00001000 -> 0x00008000
47  HighMem  0x00008000 -> 0x00008000
48Movable zone start PFN for each node
49early_node_map[2] active PFN ranges
50    0: 0x00000000 -> 0x0000009f
51    0: 0x00000100 -> 0x00008000
52On node 0 totalpages: 32671
53free_area_init_node: node 0, pgdat c07f1900, node_mem_map c1000000
54  DMA zone: 3967 pages, LIFO batch:0
55  Normal zone: 28448 pages, LIFO batch:7
56Using APIC driver default
57Intel MultiProcessor Specification v1.4
58    Virtual Wire compatibility mode.
59MPTABLE: OEM ID: COMPAQ 
60MPTABLE: Product ID: Workstation
61MPTABLE: APIC at: 0xFEE00000
62Processor #0 (Bootup-CPU)
63Processor #1
64I/O APIC #8 Version 17 at 0xFEC00000.
65Enabling APIC mode:  Flat.  Using 1 I/O APICs
66Processors: 2
67SMP: Allowing 2 CPUs, 0 hotplug CPUs
68mapped APIC to ffffb000 (fee00000)
69mapped IOAPIC to ffffa000 (fec00000)
70PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
71PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
72PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
73Allocating PCI resources starting at 10000000 (gap: 8000000:f6c00000)
74PERCPU: Allocating 41372 bytes of per cpu data
75NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
76Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32415
77Kernel command line: rw initrd=initrd.eth1.ltsp selinux=0 BOOT_IMAGE=vmlinuz.ltsp auto
78Enabling fast FPU save and restore... done.
79Initializing CPU#0
80CPU 0 irqstacks, hard=c089d000 soft=c087d000
81PID hash table entries: 512 (order: 9, 2048 bytes)
82TSC: Using PIT calibration value
83Detected 349.178 MHz processor.
84Console: colour VGA+ 80x25
85console [tty0] enabled
86Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
87Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
88Memory: 118012k/131072k available (2730k kernel code, 12540k reserved, 1418k data, 412k init, 0k highmem)
89virtual kernel memory layout:
90    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
91    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
92    vmalloc : 0xc8800000 - 0xff3fe000   ( 875 MB)
93    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
94      .init : 0xc0813000 - 0xc087a000   ( 412 kB)
95      .data : 0xc06aab0e - 0xc080d610   (1418 kB)
96      .text : 0xc0400000 - 0xc06aab0e   (2730 kB)
97Checking if this processor honours the WP bit even in supervisor mode...Ok.
98CPA: page pool initialized 1 of 1 pages preallocated
99SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
100Calibrating delay loop (skipped), value calculated using timer frequency.. 698.35 BogoMIPS (lpj=349178)
101Security Framework initialized
102SELinux:  Disabled at boot.
103Mount-cache hash table entries: 512
104Initializing cgroup subsys ns
105Initializing cgroup subsys cpuacct
106Initializing cgroup subsys devices
107CPU: L1 I cache: 16K, L1 D cache: 16K
108CPU: L2 cache: 512K
109Intel machine check architecture supported.
110Intel machine check reporting enabled on CPU#0.
111Checking 'hlt' instruction... OK.
112ENABLING IO-APIC IRQs
113..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
114CPU0: Intel Pentium II (Deschutes) stepping 01
115CPU 1 irqstacks, hard=c089e000 soft=c087e000
116Booting processor 1/1 ip 6000
117Initializing CPU#1
118Calibrating delay using timer specific routine.. 698.25 BogoMIPS (lpj=349127)
119CPU: L1 I cache: 16K, L1 D cache: 16K
120CPU: L2 cache: 512K
121Intel machine check architecture supported.
122Intel machine check reporting enabled on CPU#1.
123CPU1: Intel Pentium II (Deschutes) stepping 02
124checking TSC synchronization [CPU#0 -> CPU#1]: passed.
125Brought up 2 CPUs
126Total of 2 processors activated (1396.61 BogoMIPS).
127sizeof(vma)=84 bytes
128sizeof(page)=32 bytes
129sizeof(inode)=340 bytes
130sizeof(dentry)=132 bytes
131sizeof(ext3inode)=492 bytes
132sizeof(buffer_head)=56 bytes
133sizeof(skbuff)=184 bytes
134sizeof(task_struct)=3264 bytes
135CPU0 attaching sched-domain:
136 domain 0: span 0-1 level CPU
137  groups: 0 1
138CPU1 attaching sched-domain:
139 domain 0: span 0-1 level CPU
140  groups: 1 0
141net_namespace: 840 bytes
142Booting paravirtualized kernel on bare hardware
143Time:  9:45:25  Date: 12/09/08
144NET: Registered protocol family 16
145PCI: PCI BIOS revision 2.10 entry at 0xe1227, last bus=1
146PCI: Using configuration type 1 for base access
147mtrr: your CPUs had inconsistent fixed MTRR settings
148mtrr: probably your BIOS does not setup all CPUs.
149mtrr: corrected configuration.
150ACPI: Interpreter disabled.
151Linux Plug and Play Support v0.97 (c) Adam Belay
152pnp: PnP ACPI: disabled
153SCSI subsystem initialized
154libata version 3.00 loaded.
155usbcore: registered new interface driver usbfs
156usbcore: registered new interface driver hub
157usbcore: registered new device driver usb
158PCI: Probing PCI hardware
159PCI: Probing PCI hardware (bus 00)
160PCI: 0000:00:00.0 reg 10 32bit mmio: [54000000, 57ffffff]
161PCI: 0000:00:0b.0 reg 10 io port: [5000, 50ff]
162PCI: 0000:00:0b.0 reg 14 32bit mmio: [51300000, 513000ff]
163PCI: 0000:00:0b.0 reg 18 32bit mmio: [51200000, 51200fff]
164PCI: 0000:00:0c.0 reg 10 32bit mmio: [51400000, 51400fff]
165PCI: 0000:00:0c.0 reg 14 io port: [5400, 541f]
166PCI: 0000:00:0c.0 reg 18 32bit mmio: [51100000, 511fffff]
167PCI: 0000:00:0c.0 reg 30 32bit mmio: [0, fffff]
168pci 0000:00:0c.0: supports D1
169pci 0000:00:0c.0: supports D2
170pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
171pci 0000:00:0c.0: PME# disabled
172PCI: 0000:00:0f.0 reg 10 32bit mmio: [51600000, 51600fff]
173PCI: 0000:00:0f.0 reg 14 io port: [5480, 54bf]
174PCI: 0000:00:0f.0 reg 18 32bit mmio: [51500000, 515fffff]
175PCI: 0000:00:0f.0 reg 30 32bit mmio: [0, fffff]
176pci 0000:00:0f.0: supports D1
177pci 0000:00:0f.0: supports D2
178pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
179pci 0000:00:0f.0: PME# disabled
180PCI: 0000:00:14.1 reg 20 io port: [5440, 544f]
181PCI: 0000:00:14.2 reg 20 io port: [5420, 543f]
182* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
183* this clock source is slow. Consider trying other clock sources
184pci 0000:00:14.3: quirk: region f800-f83f claimed by PIIX4 ACPI
185pci 0000:00:14.3: quirk: region fc00-fc0f claimed by PIIX4 SMB
186PCI: 0000:01:00.0 reg 10 32bit mmio: [51000000, 5101ffff]
187PCI: 0000:01:00.0 reg 14 32bit mmio: [50000000, 507fffff]
188PCI: 0000:01:00.0 reg 18 32bit mmio: [50800000, 50ffffff]
189PCI: 0000:01:00.0 reg 30 32bit mmio: [0, ffff]
190PCI: bridge 0000:00:01.0 32bit mmio: [50000000, 510fffff]
191pci 0000:00:14.0: PIIX/ICH IRQ router [8086/7110]
192pci 0000:00:0b.0: PCI->APIC IRQ transform: INT A -> IRQ 21
193pci 0000:00:0c.0: PCI->APIC IRQ transform: INT A -> IRQ 20
194pci 0000:00:0f.0: PCI->APIC IRQ transform: INT A -> IRQ 18
195pci 0000:00:14.2: PCI->APIC IRQ transform: INT D -> IRQ 19
196pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 22
197NetLabel: Initializing
198NetLabel:  domain hash size = 128
199NetLabel:  protocols = UNLABELED CIPSOv4
200NetLabel:  unlabeled traffic allowed by default
201tracer: 772 pages allocated for 65536 entries of 48 bytes
202   actual entries 65620
203ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread C7428000 could not acquire Mutex [1] [20080609]
204pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
205pci 0000:00:01.0:   IO window: disabled
206pci 0000:00:01.0:   MEM window: 0x50000000-0x510fffff
207pci 0000:00:01.0:   PREFETCH window: 0x00000010000000-0x000000100fffff
208bus: 00 index 0 io port: [0, ffff]
209bus: 00 index 1 mmio: [0, ffffffffffffffff]
210bus: 01 index 0 mmio: [0, 0]
211bus: 01 index 1 mmio: [50000000, 510fffff]
212bus: 01 index 2 mmio: [10000000, 100fffff]
213bus: 01 index 3 mmio: [0, 0]
214NET: Registered protocol family 2
215IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
216TCP established hash table entries: 4096 (order: 3, 32768 bytes)
217TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
218TCP: Hash tables configured (established 4096 bind 4096)
219TCP reno registered
220NET: Registered protocol family 1
221checking if image is initramfs... it is
222Freeing initrd memory: 5628k freed
223platform rtc_cmos: registered platform RTC device (no PNP device found)
224apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
225apm: disabled - APM is not SMP safe.
226audit: initializing netlink socket (disabled)
227type=2000 audit(1228815928.589:1): initialized
228HugeTLB registered 4 MB page size, pre-allocated 0 pages
229VFS: Disk quotas dquot_6.5.1
230Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
231msgmni has been set to 241
232Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
233io scheduler noop registered
234io scheduler anticipatory registered
235io scheduler deadline registered
236io scheduler cfq registered (default)
237pci 0000:00:00.0: Limiting direct PCI/PCI transfers
238pci 0000:00:0f.0: Firmware left e100 interrupts enabled; disabling
239pci 0000:01:00.0: Boot video device
240pci_hotplug: PCI Hot Plug PCI Core version: 0.5
241acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
242isapnp: Scanning for PnP cards...
243 00:01: card 'ESS ES1869 Plug and Play AudioDrive'
244isapnp: 1 Plug & Play card detected total
245Non-volatile memory driver v1.2
246Linux agpgart interface v0.103
247agpgart-intel 0000:00:00.0: Intel 440BX Chipset
248agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x54000000
249Serial: 8250/16550 driver4 ports, IRQ sharing enabled
250serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
251serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
252brd: module loaded
253loop: module loaded
254input: Macintosh mouse button emulation as /devices/virtual/input/input0
255Driver 'sd' needs updating - please use bus_type methods
256Driver 'sr' needs updating - please use bus_type methods
257ata_piix 0000:00:14.1: version 2.12
258scsi0 : ata_piix
259scsi1 : ata_piix
260ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14
261ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15
262ata2.00: ATAPI: Compaq  CRD-8241B, 1.14, max MWDMA2
263ata2.00: configured for MWDMA2
264scsi 1:0:0:0: CD-ROM            COMPAQ   CRD-8241B        1.14 PQ: 0 ANSI: 5
265sr0: scsi3-mmc drive: 1x/24x cd/rw xa/form2 cdda tray
266Uniform CD-ROM driver Revision: 3.20
267sr 1:0:0:0: Attached scsi CD-ROM sr0
268sr 1:0:0:0: Attached scsi generic sg0 type 5
269ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
270USB Universal Host Controller Interface driver v3.0
271uhci_hcd 0000:00:14.2: UHCI Host Controller
272uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
273uhci_hcd 0000:00:14.2: irq 19, io base 0x00005420
274usb usb1: configuration #1 chosen from 1 choice
275hub 1-0:1.0: USB hub found
276hub 1-0:1.0: 2 ports detected
277usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
278usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
279usb usb1: Product: UHCI Host Controller
280usb usb1: Manufacturer: Linux 2.6.27.5-117.fc10.i586 uhci_hcd
281usb usb1: SerialNumber: 0000:00:14.2
282PNP: No PS/2 controller found. Probing ports directly.
283serio: i8042 KBD port at 0x60,0x64 irq 1
284serio: i8042 AUX port at 0x60,0x64 irq 12
285mice: PS/2 mouse device common for all mice
286input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
287rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
288rtc0: alarms up to one day
289psmouse serio1: ID: 10 00 64<6>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
290device-mapper: uevent: version 1.0.3
291device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
292cpuidle: using governor ladder
293cpuidle: using governor menu
294usbcore: registered new interface driver hiddev
295usbcore: registered new interface driver usbhid
296usbhid: v2.6:USB HID core driver
297nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
298CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
299nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
300sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
301ip_tables: (C) 2000-2006 Netfilter Core Team
302TCP cubic registered
303Initializing XFRM netlink socket
304NET: Registered protocol family 17
305Using IPI No-Shortcut mode
306registered taskstats version 1
307  Magic number: 4:900:777
308Freeing unused kernel memory: 412k freed
309Write protecting the kernel text: 2732k
310Write protecting the kernel read-only data: 1172k
311e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
312e100: Copyright(c) 1999-2006 Intel Corporation
313e100 0000:00:0c.0: PME# disabled
314e100: eth0: e100_probe: addr 0x51400000, irq 20, MAC addr 00:08:c7:5c:bc:18
315e100 0000:00:0f.0: PME# disabled
316e100: eth1: e100_probe: addr 0x51600000, irq 18, MAC addr 00:02:b3:38:89:e4
317RPC: Registered udp transport module.
318RPC: Registered tcp transport module.
319nbd: registered device at major 43
320squashfs: version 3.4 (2008/08/26) Phillip Lougher
321e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
322udevd version 127 started
323sym0: <875> rev 0x4 at pci 0000:00:0b.0 irq 21
324sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
325sym0: SCSI BUS has been reset.
326scsi2 : sym-2.2.3
327piix4_smbus 0000:00:14.3: SMBus Host Controller at 0xfc00, revision 0
328ns558 00:01.02: activated
329gameport: NS558 PnP Gameport is pnp00:01.02/gameport0, io 0x201, speed 685kHz
330es18xx-pnpbios 00:01.01: activated
331es18xx-pnpbios 00:01.01: disabled
332es18xx-pnpbios: probe of 00:01.01 failed with error -2
333es18xx 00:01.00: activated
334es18xx 00:01.01: activated
335ALSA sound/isa/es18xx.c:1664: [0x220] ESS1869 chip found
336NET: Registered protocol family 10
337lo: Disabled Privacy Extensions
338ADDRCONF(NETDEV_UP): eth0: link is not ready
339eth1: no IPv6 routers present
340Adding 65528k swap on /dev/mapper/swap0.  Priority:-1 extents:1 across:65528k