| 1 | > pulseaudio -C |
|---|
| 2 | W: ltdl-bind-now.c: Failed to find original dlopen loader. |
|---|
| 3 | W: pid.c: Stale PID file, overwriting. |
|---|
| 4 | W: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted |
|---|
| 5 | W: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted |
|---|
| 6 | ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL surround40:0 |
|---|
| 7 | ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0 |
|---|
| 8 | Welcome to PulseAudio! Use "help" for usage information. |
|---|
| 9 | >>> dump |
|---|
| 10 | ### Configuration dump generated at Sat Nov 29 19:11:56 2008 |
|---|
| 11 | |
|---|
| 12 | load-module module-alsa-sink device_id=0 channels=4 sink_name=alsa_output.default |
|---|
| 13 | load-module module-alsa-source device_id=0 source_name=alsa_input.default |
|---|
| 14 | load-module module-esound-protocol-unix |
|---|
| 15 | load-module module-native-protocol-unix |
|---|
| 16 | load-module module-gconf |
|---|
| 17 | load-module module-volume-restore |
|---|
| 18 | load-module module-default-device-restore |
|---|
| 19 | load-module module-rescue-streams |
|---|
| 20 | load-module module-suspend-on-idle |
|---|
| 21 | load-module module-x11-publish |
|---|
| 22 | load-module module-remap-sink sink_name=front_stereo master=alsa_output.default channels=2 channel_map=front-left,front-right master_channel_map=front-left,front-right |
|---|
| 23 | load-module module-remap-sink sink_name=rear_stereo master=alsa_output.default channels=2 channel_map=front-left,front-right master_channel_map=rear-left,rear-right |
|---|
| 24 | load-module module-x11-bell sample=x11-bell |
|---|
| 25 | load-module module-cli exit_on_eof=1 |
|---|
| 26 | |
|---|
| 27 | set-sink-volume alsa_output.default 0x10000 |
|---|
| 28 | set-sink-mute alsa_output.default 0 |
|---|
| 29 | set-sink-volume front_stereo 0x10000 |
|---|
| 30 | set-sink-mute front_stereo 0 |
|---|
| 31 | set-sink-volume rear_stereo 0x10000 |
|---|
| 32 | set-sink-mute rear_stereo 0 |
|---|
| 33 | set-source-volume alsa_output.default.monitor 0x10000 |
|---|
| 34 | set-source-mute alsa_output.default.monitor 0 |
|---|
| 35 | set-source-volume alsa_input.default 0xd6b6 |
|---|
| 36 | set-source-mute alsa_input.default 0 |
|---|
| 37 | set-source-volume front_stereo.monitor 0x10000 |
|---|
| 38 | set-source-mute front_stereo.monitor 0 |
|---|
| 39 | set-source-volume rear_stereo.monitor 0x10000 |
|---|
| 40 | set-source-mute rear_stereo.monitor 0 |
|---|
| 41 | |
|---|
| 42 | set-default-sink front_stereo |
|---|
| 43 | set-default-source alsa_input.default |
|---|
| 44 | |
|---|
| 45 | ### EOF |
|---|
| 46 | >>> info |
|---|
| 47 | Memory blocks currently allocated: 2, size: 3.5 KiB. |
|---|
| 48 | Memory blocks allocated during the whole lifetime: 498, size: 1.6 MiB. |
|---|
| 49 | Memory blocks imported from other processes: 0, size: 0 B. |
|---|
| 50 | Memory blocks exported to other processes: 0, size: 0 B. |
|---|
| 51 | Total sample cache size: 0 B. |
|---|
| 52 | Default sample spec: s16le 2ch 44100Hz |
|---|
| 53 | Default sink name: front_stereo |
|---|
| 54 | Default source name: alsa_input.default |
|---|
| 55 | Memory blocks of type POOL: 2 allocated/198 accumulated. |
|---|
| 56 | Memory blocks of type POOL_EXTERNAL: 0 allocated/0 accumulated. |
|---|
| 57 | Memory blocks of type APPENDED: 0 allocated/0 accumulated. |
|---|
| 58 | Memory blocks of type USER: 0 allocated/0 accumulated. |
|---|
| 59 | Memory blocks of type FIXED: 0 allocated/300 accumulated. |
|---|
| 60 | Memory blocks of type IMPORTED: 0 allocated/0 accumulated. |
|---|
| 61 | 14 module(s) loaded. |
|---|
| 62 | index: 0 |
|---|
| 63 | name: <module-alsa-sink> |
|---|
| 64 | argument: <device_id=0 channels=4 sink_name=alsa_output.default> |
|---|
| 65 | used: -1 |
|---|
| 66 | auto unload: no |
|---|
| 67 | index: 1 |
|---|
| 68 | name: <module-alsa-source> |
|---|
| 69 | argument: <device_id=0 source_name=alsa_input.default> |
|---|
| 70 | used: -1 |
|---|
| 71 | auto unload: no |
|---|
| 72 | index: 2 |
|---|
| 73 | name: <module-esound-protocol-unix> |
|---|
| 74 | argument: <> |
|---|
| 75 | used: -1 |
|---|
| 76 | auto unload: no |
|---|
| 77 | index: 3 |
|---|
| 78 | name: <module-native-protocol-unix> |
|---|
| 79 | argument: <> |
|---|
| 80 | used: -1 |
|---|
| 81 | auto unload: no |
|---|
| 82 | index: 4 |
|---|
| 83 | name: <module-gconf> |
|---|
| 84 | argument: <> |
|---|
| 85 | used: -1 |
|---|
| 86 | auto unload: no |
|---|
| 87 | index: 5 |
|---|
| 88 | name: <module-volume-restore> |
|---|
| 89 | argument: <> |
|---|
| 90 | used: -1 |
|---|
| 91 | auto unload: no |
|---|
| 92 | index: 6 |
|---|
| 93 | name: <module-default-device-restore> |
|---|
| 94 | argument: <> |
|---|
| 95 | used: -1 |
|---|
| 96 | auto unload: no |
|---|
| 97 | index: 7 |
|---|
| 98 | name: <module-rescue-streams> |
|---|
| 99 | argument: <> |
|---|
| 100 | used: -1 |
|---|
| 101 | auto unload: no |
|---|
| 102 | index: 8 |
|---|
| 103 | name: <module-suspend-on-idle> |
|---|
| 104 | argument: <> |
|---|
| 105 | used: -1 |
|---|
| 106 | auto unload: no |
|---|
| 107 | index: 9 |
|---|
| 108 | name: <module-x11-publish> |
|---|
| 109 | argument: <> |
|---|
| 110 | used: -1 |
|---|
| 111 | auto unload: no |
|---|
| 112 | index: 10 |
|---|
| 113 | name: <module-remap-sink> |
|---|
| 114 | argument: <sink_name=front_stereo master=alsa_output.default channels=2 channel_map=front-left,front-right master_channel_map=front-left,front-right> |
|---|
| 115 | used: -1 |
|---|
| 116 | auto unload: no |
|---|
| 117 | index: 11 |
|---|
| 118 | name: <module-remap-sink> |
|---|
| 119 | argument: <sink_name=rear_stereo master=alsa_output.default channels=2 channel_map=front-left,front-right master_channel_map=rear-left,rear-right> |
|---|
| 120 | used: -1 |
|---|
| 121 | auto unload: no |
|---|
| 122 | index: 12 |
|---|
| 123 | name: <module-x11-bell> |
|---|
| 124 | argument: <sample=x11-bell> |
|---|
| 125 | used: -1 |
|---|
| 126 | auto unload: no |
|---|
| 127 | index: 13 |
|---|
| 128 | name: <module-cli> |
|---|
| 129 | argument: <exit_on_eof=1> |
|---|
| 130 | used: -1 |
|---|
| 131 | auto unload: no |
|---|
| 132 | 3 sink(s) available. |
|---|
| 133 | index: 0 |
|---|
| 134 | name: <alsa_output.default> |
|---|
| 135 | driver: <modules/module-alsa-sink.c> |
|---|
| 136 | flags: HW_VOLUME_CTRL LATENCY HARDWARE |
|---|
| 137 | state: SUSPENDED |
|---|
| 138 | volume: <0: 100% 1: 100% 2: 100% 3: 100%> |
|---|
| 139 | mute: <0> |
|---|
| 140 | latency: <0 usec> |
|---|
| 141 | monitor source: <0> |
|---|
| 142 | sample spec: <s16le 4ch 44100Hz> |
|---|
| 143 | channel map: <front-left,front-right,rear-left,rear-right> |
|---|
| 144 | used by: <0> |
|---|
| 145 | linked by: <2> |
|---|
| 146 | module: <0> |
|---|
| 147 | description: <ALSA PCM on surround40:0 (ALC888 Analog) via DMA> |
|---|
| 148 | * index: 1 |
|---|
| 149 | name: <front_stereo> |
|---|
| 150 | driver: <modules/module-remap-sink.c> |
|---|
| 151 | flags: LATENCY |
|---|
| 152 | state: SUSPENDED |
|---|
| 153 | volume: <0: 100% 1: 100%> |
|---|
| 154 | mute: <0> |
|---|
| 155 | latency: <0 usec> |
|---|
| 156 | monitor source: <2> |
|---|
| 157 | sample spec: <s16le 2ch 44100Hz> |
|---|
| 158 | channel map: <front-left,front-right> |
|---|
| 159 | used by: <0> |
|---|
| 160 | linked by: <0> |
|---|
| 161 | module: <10> |
|---|
| 162 | description: <Remapped ALSA PCM on surround40:0 (ALC888 Analog) via DMA> |
|---|
| 163 | index: 2 |
|---|
| 164 | name: <rear_stereo> |
|---|
| 165 | driver: <modules/module-remap-sink.c> |
|---|
| 166 | flags: LATENCY |
|---|
| 167 | state: SUSPENDED |
|---|
| 168 | volume: <0: 100% 1: 100%> |
|---|
| 169 | mute: <0> |
|---|
| 170 | latency: <0 usec> |
|---|
| 171 | monitor source: <3> |
|---|
| 172 | sample spec: <s16le 2ch 44100Hz> |
|---|
| 173 | channel map: <front-left,front-right> |
|---|
| 174 | used by: <0> |
|---|
| 175 | linked by: <0> |
|---|
| 176 | module: <11> |
|---|
| 177 | description: <Remapped ALSA PCM on surround40:0 (ALC888 Analog) via DMA> |
|---|
| 178 | 4 source(s) available. |
|---|
| 179 | index: 0 |
|---|
| 180 | name: <alsa_output.default.monitor> |
|---|
| 181 | driver: <modules/module-alsa-sink.c> |
|---|
| 182 | flags: |
|---|
| 183 | state: SUSPENDED |
|---|
| 184 | volume: <0: 100% 1: 100% 2: 100% 3: 100%> |
|---|
| 185 | mute: <0> |
|---|
| 186 | latency: <0 usec> |
|---|
| 187 | sample spec: <s16le 4ch 44100Hz> |
|---|
| 188 | channel map: <front-left,front-right,rear-left,rear-right> |
|---|
| 189 | used by: <0> |
|---|
| 190 | linked by: <0> |
|---|
| 191 | monitor_of: <0> |
|---|
| 192 | module: <0> |
|---|
| 193 | description: <Monitor Source of ALSA PCM on surround40:0 (ALC888 Analog) via DMA> |
|---|
| 194 | * index: 1 |
|---|
| 195 | name: <alsa_input.default> |
|---|
| 196 | driver: <modules/module-alsa-source.c> |
|---|
| 197 | flags: HW_VOLUME_CTRL LATENCY HARDWARE |
|---|
| 198 | state: SUSPENDED |
|---|
| 199 | volume: <0: 83% 1: 83%> |
|---|
| 200 | mute: <0> |
|---|
| 201 | latency: <0 usec> |
|---|
| 202 | sample spec: <s16le 2ch 44100Hz> |
|---|
| 203 | channel map: <front-left,front-right> |
|---|
| 204 | used by: <0> |
|---|
| 205 | linked by: <0> |
|---|
| 206 | module: <1> |
|---|
| 207 | description: <ALSA PCM on front:0 (ALC888 Analog) via DMA> |
|---|
| 208 | index: 2 |
|---|
| 209 | name: <front_stereo.monitor> |
|---|
| 210 | driver: <modules/module-remap-sink.c> |
|---|
| 211 | flags: |
|---|
| 212 | state: SUSPENDED |
|---|
| 213 | volume: <0: 100% 1: 100%> |
|---|
| 214 | mute: <0> |
|---|
| 215 | latency: <0 usec> |
|---|
| 216 | sample spec: <s16le 2ch 44100Hz> |
|---|
| 217 | channel map: <front-left,front-right> |
|---|
| 218 | used by: <0> |
|---|
| 219 | linked by: <0> |
|---|
| 220 | monitor_of: <1> |
|---|
| 221 | module: <10> |
|---|
| 222 | description: <Monitor Source of Remapped ALSA PCM on surround40:0 (ALC888 Analog) via DMA> |
|---|
| 223 | index: 3 |
|---|
| 224 | name: <rear_stereo.monitor> |
|---|
| 225 | driver: <modules/module-remap-sink.c> |
|---|
| 226 | flags: |
|---|
| 227 | state: SUSPENDED |
|---|
| 228 | volume: <0: 100% 1: 100%> |
|---|
| 229 | mute: <0> |
|---|
| 230 | latency: <0 usec> |
|---|
| 231 | sample spec: <s16le 2ch 44100Hz> |
|---|
| 232 | channel map: <front-left,front-right> |
|---|
| 233 | used by: <0> |
|---|
| 234 | linked by: <0> |
|---|
| 235 | monitor_of: <2> |
|---|
| 236 | module: <11> |
|---|
| 237 | description: <Monitor Source of Remapped ALSA PCM on surround40:0 (ALC888 Analog) via DMA> |
|---|
| 238 | 1 client(s) logged in. |
|---|
| 239 | index: 0 |
|---|
| 240 | name: <STDIN/STDOUT client> |
|---|
| 241 | driver: <pulsecore/cli.c> |
|---|
| 242 | owner module: <13> |
|---|
| 243 | 2 sink input(s) available. |
|---|
| 244 | index: 0 |
|---|
| 245 | name: <Remapped Stream> |
|---|
| 246 | driver: <modules/module-remap-sink.c> |
|---|
| 247 | flags: DONT_MOVE |
|---|
| 248 | state: CORKED |
|---|
| 249 | sink: <0> 'alsa_output.default' |
|---|
| 250 | volume: <0: 100% 1: 100%> |
|---|
| 251 | mute: <0> |
|---|
| 252 | latency: <0 usec> |
|---|
| 253 | sample spec: <s16le 2ch 44100Hz> |
|---|
| 254 | channel map: <front-left,front-right> |
|---|
| 255 | resample method: copy |
|---|
| 256 | module: <10> |
|---|
| 257 | index: 1 |
|---|
| 258 | name: <Remapped Stream> |
|---|
| 259 | driver: <modules/module-remap-sink.c> |
|---|
| 260 | flags: DONT_MOVE |
|---|
| 261 | state: CORKED |
|---|
| 262 | sink: <0> 'alsa_output.default' |
|---|
| 263 | volume: <0: 100% 1: 100%> |
|---|
| 264 | mute: <0> |
|---|
| 265 | latency: <0 usec> |
|---|
| 266 | sample spec: <s16le 2ch 44100Hz> |
|---|
| 267 | channel map: <rear-left,rear-right> |
|---|
| 268 | resample method: copy |
|---|
| 269 | module: <11> |
|---|
| 270 | 0 source outputs(s) available. |
|---|
| 271 | 1 cache entries available. |
|---|
| 272 | name: <x11-bell> |
|---|
| 273 | index: <0> |
|---|
| 274 | sample spec: <n/a> |
|---|
| 275 | channel map: <n/a> |
|---|
| 276 | length: <0> |
|---|
| 277 | duration: <0.0s> |
|---|
| 278 | volume: <0: 100% 1: 100% 2: 100% 3: 100% 4: 100% 5: 100% 6: 100% 7: 100%> |
|---|
| 279 | lazy: yes |
|---|
| 280 | filename: /home/mast/snd/bell.wav |
|---|
| 281 | 0 autoload entries available. |
|---|
| 282 | >>> E: sink.c: Assertion 'PA_SINK_OPENED(s->thread_info.state)' failed at pulsecore/sink.c:424, function pa_sink_render(). Aborting. |
|---|
| 283 | Abort |
|---|